If this is the case, I can only suggest you either work from images you can find on the internet to ascertain the missing detail or shout out on a pinball forum for someone to send you a photo/image of the missing artwork. Difficulties arise where you have pieces where the artwork is totally gone, either flaked or scraped off. If you have a backglass that is in poor condition but most of the detail is still there, congratulations! Touching up will be easy. I?d suggest saving your time if this is the case.Īny art program you are comfortable with. Just remember it will most likely be cheaper or only cost a little more to buy an original if available. Translites have few difficulties when it comes to scanning. You will be doing many saves during your touchups, JPEG is no good as it is a ?lossy? format, the picture will degrade slightly with each save. Use a non-lossy file format like BMP or TIFF for all your work. Below this level you start to lose fine detail, above this the file becomes huge. Many stores now have large scanners that can adjust scan depth, commonly known as ?depth of field? to overcome the fact the image is 3-4mm deep behind the glass. You will have to touch this up with artwork programs, taking anywhere from a few to many hours.Ģ) Large format scanner ? take your glass to a copier or printing shop. This will lead to the A4 scans which you will have to stitch together being slightly blurry on edge detail. Still has the issue of 3-4mm thick glass when scanning a backglass. Ideal for scanning plastics, playfields or translites. It can be placed flush against a surface. Has no ?lip? where the plastic surround meets the scanning bed. No longer made but often comes up on eBay. Two options are available:ġ) HP4600/4670 scanner ? An A4 size scanner that I use at home. The image on a glass is screened on the rear, about 3-4 mm below the front surface. Though not as original, they are often of a reasonable quality and will satisfy many owners with a bit of additonal effort.īackglass scanning poses some difficulties. These can also re reproduced.īackglasses can also be re-created as a translite. Thankfully most translites are still easily available, though sometimes expensive. Heat from the globes behind the backglass often damage the paint as does repeated careless removal of the backglass from the machine. Backglasses were made by screen printing ink onto the rear of the glass. One of the biggest bugbears of owing solid state (SS) machines and electromechanical (EM) machines is the eternal search for a backglass in any condition let alone good condition. It is intended to be a guide and advisory resource to connect you with others who have already re-created a backglass or translite, to share your knowledge and skills.Īs other people re-create backglasses or translites, I'll add them to the list of people who may be able to assist other members: This has been done piecemeal in the past, I?ve decided to collate all information here under one sticky as a resource for anyone interested.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |